Recently I played a little with acrylic paint pouring. I made this tray which I use as a dish on my bathroom counter and I made this coaster set below. The original tray was purchased from Target in the kitchen section and the coasters are travertine tiles which I primed with plain white acrylic paint … Continue reading “Acrylic Pour Art”
Recently I played a little with acrylic paint pouring. I made this tray which I use as a dish on my bathroom counter and I made this coaster set below. The original tray was purchased from Target in the kitchen section and the coasters are travertine tiles which I primed with plain white acrylic paint before I coated them using the acrylic pouring technique I detail below.
To make acrylic pouring paint I mixed:
21g Paint (Liquidtex Basic)
1-2 tiny drops of silicone oil
Each coaster needed about 50g of mixture and the tray used about 75g total. I mixed a handful of colors in separate containers and then layered them in another cup.
I flipped this cup over onto a coaster and let the paint spread out, making sure it covered all the sides. I used a small kitchen torch to bring out the cell shapes in the paint and then I let it dry (about 2 days).
When completely dried, I coated all pieces with clear epoxy resin by Art Resin (https://www.artresin.com/). This time I used my small kitchen torch to torch out the air bubbles in the resin and I let it dry/cure for 72hours before using. Art Resin is heat resistant resin that is perfect for any surface that may come in contact with hot surfaces such as a mug of hot coffee.
I want to share this toy kitchen make-over that I completed in July 2017 but first, a little backstory for context. My kids (18 months and 3 years old at the time) LOVE playing with toy food in pretend kitchens. If we are at a play center, or friend’s home, and there is a play … Continue reading “12 years of dust”
I want to share this toy kitchen make-over that I completed in July 2017 but first, a little backstory for context. My kids (18 months and 3 years old at the time) LOVE playing with toy food in pretend kitchens. If we are at a play center, or friend’s home, and there is a play kitchen, I guarantee you my children will want to play with it. Back to my point — my older child had a play kitchen before our youngest child came along: it was plastic and lightweight, and it was the perfect size for my tiny apartment. The only problem was, it was easy to knock over and he thought it was great for climbing. Around the time my youngest was born in 2015, we upgraded to a wooden set from Costco. Long story short: it broke quickly and we replaced it with another one that also didn’t last very long.
I soon grew frustrated by these poor quality toys and decided to purchase a solid wood kitchen set. I quickly learned however that high quality, built-to-last wooden kitchen play sets are very expensive (in the vicinity of $1000). I scanned Craigslist and came across this pink beauty at a more tolerable price. It was 12 years old, covered in dust and faded badly. In other words, it was perfect (read: a perfect project for me)!
Read on for the details of how I transformed this tired, but solid, play kitchen into the refreshed beauty it is today!
Unfortunately, I didn’t have this blog in mind when I undertook this project, so I do not have any step-by-step photos.
The process went something like this:
Remove all screws and un-assemble anything that can come apart.
Wash down everything with Lysol wipes. Repeat. Repeat. Repeat.
Notice that there is still a lot of dust in hard to reach places: use hose to power wash it. Lay it out in the sun to dry.
When satisfied with how clean it is, get to sanding. Sand all the wooden parts and try to even out any areas that have nicks and dings.
Clean off all the dust from sanding.
Paint with 2 coats of chalk paint (I think it was Folk Art brand). Sand very lightly between coats.
When paint is dry and you are happy with the paint job, apply 2-3 coats of Minwax Polycrylic. This seals the paint and brings out the shine. Allow to dry completely between coats.
Re-assemble all the pieces and attach hardware.
Admire your hard work!
Keep scrolling for more photos, a few tips and tricks and a beautiful faux-flame hack for the burners!
To create this look I first mixed red acrylic craft paint with a little water (to thin it out), and I poured enough in to coat the bottom of the burners. It took a while to dry onto the plastic, but once it was dry I added gold flakes and poured in an epoxy resin. The epoxy takes about a full day to harden but the result is just beautiful! The flakes are suspended in the clear shiny resin and the burners look more realistic than before.
My kids love their new play kitchen and this twelve year old set gets to see a few more years of play. It is solid and I am confident it will hold up until my kids out grow it.
Update June 14th, 2019: Turns out, our daughter is absolutely in love with foxes. I have since redecorated her room again but I’ve been slow in photographing it and posting. I hope to do that soon. To kick off this blog, I want to share a few projects I’ve completed recently. My daughter is two … Continue reading “Crafting under the sea”
Update June 14th, 2019: Turns out, our daughter is absolutely in love with foxes. I have since redecorated her room again but I’ve been slow in photographing it and posting. I hope to do that soon.
To kick off this blog, I want to share a few projects I’ve completed recently. My daughter is two and it was time to give her nursery a big girl makeover. I decided on an under the sea theme and got to work making custom wall decor.
This first wall hanging was made with a pre-made blank wooden sign from Hobby Lobby. I painted it purple to match the palette of my daughter’s room and I cut the words in vinyl using a Brother Scan N Cut machine (similar to a Cricut or Silhouette, in case you’ve never heard of it). I adorned it with real seashells using hot glue.
This wall hanging was completed quickly in a similar manner as the first. I designed the words and cut them out of vinyl using the Brother Scan N Cut, and I painted the background with mint green and purple acrylic craft paint. This sign is hanging near my daughter’s bed so a heavy wooden sign wouldn’t work (we live in earthquake territory so there is a risk of things falling off the wall). Instead, this is simply a light piece of acrylic canvas board. Again, I used real shells to keep with my under the sea theme!
My kids love jelly fish so I just had to have some jellyfish hanging from the ceiling! These are simple to make using paper party lanterns and ribbon. I trimmed the bottom 1/4 of the lantern off and used hot glue to adhere lots of different ribbons to the insides of each “jellyfish”. I added an edge of wide white ribbon to the base of the lantern to give it a completed look, and I hung them from the ceiling with clear plastic cording.